|
|
|
|
| DESKTOP SERVER 2000 DOWNLOAD & INSTALL INSTRUCTIONS
To download Desktop Server 2000 v1.0 and the the crack file and the registration file: To the email software download page: Download And Installation Instructions
How do you Install Desktop Server 2000 v1.0 ?After you have downloaded Desktop Server 2000 v1.0 install the program to your computer. Follow the following steps to start the installation process and to install the program correctly. Note: It is important that you restart your computer before you attempt to register the program !!
How do you register Desktop Server 2000 v1.0 ? Note: It is important that you make sure the program is not running/open before you apply the registration files, if it is the registration process will fail !! After you have downloaded the crack file and the registration file, and you have extracted these files to your computers Desktop using WinZip the first thing you do is highlight/select the crack file dts2000v1.0crack.exe by clicking it once, while
selected click your right mouse button over the crack file and a context menu will appear, click the option that says Copy. Next copy the crack file dts2000v1.0crack.exe (only this file) into the programs installation directory, the path to this directory should be located on your C Drive, via the Program Files directory, via the MTI directory and then via the ds2000 directory. When the crack file has been copied into the
ds2000 installation directory run the file by double clicking it then apply the crack by clicking the Patch button. What do I do if I can't find the ds2000 installation directory ? If you can't find the ds2000 directory by following the directory path I have used in the paragraph above it means you have installed the program onto a different drive or into a different directory path on your computer. If this is the case all you have to do is click the Start menu button on your computers Desktop, bottom left hand corner of the screen and then click Search. Depending on what operating system you are using the Search option may be named differently. Just click all the links via your Start menu to locate the option that allows you to search for Files or Folders… etc. Next, click the option that says All Files and Folders, if it exists, if not just use the nearest alternative. Now, in the Look in box, if it exists select you C Drive. In the Search Box type ds2000 and then click the Search button, it it exists. When the search feature has finished scanning your C Drive you should see a folder named ds2000 located in the right had window/pane. Next, double click this folder to enter this directory, this is where you copy and apply the crack. With the dts2000v1.0crack.exe file still selected position your mouse pointer
in the right window, click your right mouse button, select Paste from the context menu that appears and the crack file should be copied into this directory. What do I do if I searched for the ds2000 installation directory but it does not exist ? If for any reason the installation folder ds2000 does not exist after you do a search it means you changed the name of this folder during the installation of the program. If this is the case then un-install then reinstall the program making sure you create the installation directory named ds2000 during the installation process. Then when you have reinstalled the program repeat the search procedure above to locate the ds2000 directory. I have copied the crack file "dts2000v1.0crack.exe" into the installation directory & applied it, what do I do with the registration file "dts2000v1.0.reg" ? The registration file dts2000v1.0.reg does not need to be copied anywhere. To apply the file, double click it which should bring up a window/dialog box, click Yes, a second dialog box should open, click OK, that's it, the program should now be fully registered. Note: Make sure you apply the registration file after you have applied the crack file, if you don't the program my not to register correctly which might cause you problems further down the line. How do you know if Desktop Server 2000 v1.0 has been registered successfully ? To check if the program has been registered successfully run the program, click the Help menu option located at the top of the programs main window and then click About. If there is a line of text in the small window titled
About Desktop Server 2000 that opens that reads Your registration number is: (followed by a number) then the program has been registered successfully. If there is no registration number it might not necessarily mean the program has not been registered, if it has not you will not be able to send more than 10 E-mail's at a time. To test if the program has been registered create a .txt file (text file) on your computers desktop, rename it to testemaillist.txt and then open the file. Within the file create a list of 20 or more test E-mail addresses making sure you list
1 E-mail address per line. Click Here for an example test E-mail list to see how your bulk E-mail lists should be constructed. If you don't construct your test or bulk E-mail lists like this the program will not be able to import them... Now run DTS2000, click the Wizard button, in the From Name: empty field/box type test, in the
From Address: empty field/box type test, uncheck the check box Load DNS Server Automatically, in the DNS:empty field/box type
100.100.100.100, click the Next button. On the next screen in the Subject: empty field/box type test, in the large empty
field/box below type test, click the Next button. On the next screen click the Import List folder button on the tool bar, use the Look in:
box to locate the testemaillist.txt text file you created on your Desktop. When located double click the testemaillist.txt file and the 20 fake E-mail addresses within this text file will be imported into the program, click the Finish button and a small window will open titled Confirm, click the No button. If the program has not been registered a window will open titled Demo telling you that the program is presently limited to sending
10 emails. If the program has been registered successfully the program will start to send your test ad to your imported 20 test E-mail addresses. How do you set-up Desktop Server 2000 v1.0 correctly ? Your first 2 steps: The first thing you need to do is create about 5 3rd party throw away E-mail accounts, you can create as many free E-mail accounts as you want from zWallet (Highly Recommended) Get your free email account HERE. Next run the program, click the Wizard button then follow the instruction below to setup the program correctly. Setup Window 1 - Entering your name, E-mail address & DNS information: After clicking the Wizard button a window will open titled Mailing Wizard, in the first window that opens enter your name in the From Name:
box and enter 1 of the 5 E-mail addresses your created into the From Address: box. Next make sure the Load DNS Server Automatically check box is selected (has a tick in the box). Important Note: It is importance that you set-up the Load DNS Server Automatically check box and the DNS: box correctly. If this information is not entered
correctly you could loose your ISP due to Spam complaints. Don't let this worry you though because their is a safe way around sending bulk E-mail using Desktop Server 2000 v1.0 which I will explain in more detail a little later. I have literally sent out my ad using this program to millions of E-mail addresses and have never lost my ISP or had any complaints form SFI due to Spam complaints. All I am going to do first is ask you to test the program by sending your ad to yourself and to me to make sure the program is setup and working correctly and to make sure that your ad is actually being delivered. Setup Window 2 - Editing & entering your ad: The next window that opens is where you enter your ad, Click Here for an example ad you can use. In the Subject: box enter the Subject line of your ad, in the large empty box below enter the main body message of your ad. You will need to edit some of the information, i.e. your personal details and replace my E-mail address (mailto:lunata777@yahoo.com) with one of your own, more on this later. Important Note: Before you enter your ad it is critical that you first understand how your ads must be constructed. You must not include any of your personal referral links or mention any reference of the company you are promoting anywhere within your first ad, if you do and get a Spam complaint you may loose your business account. To understand how you must construct you ads take this example ad Click Here I have used, you will see I have included a paragraph of text that reads: If you are interested in learning more please send a blank E mail with "Tell Me More" written in the Subject Line and mail it to mailto:lunata777@yahoo.com Earlier I said if you decide to use my example ad you will need to edit some of the information, i.e your personal details and replace my E-mail address (mailto:lunata777@yahoo.com) with one of your own, i.e. 1 of the 5 E-mail addresses you created but a different E-mail address than the one you used for your From Address:. The E-mail address you used for your "Tell Me More" E-mail address is where all the requests for more information will arrive, the From Address: is where all your reply, auto responder, undeliverable and junk E-mail will end up. When ever
you receive a "Tell Me More" request for more information from a prospect you send them a first follow-up letter. This first follow-up letter can include any of your personal referral links and any reference to the program you are promoting without fear of getting accused of Spam and loosing your SFI account. What I recommend is that you create and use a different From Address: E-Mail address for each bulk E-mail list you send. There are 2 reason for this, firstly there is a high probability your From Address: E-mail accounts will be closed down
anyway due to Spam complaints. Secondly, when your From Address: E-mail accounts exceed their maximum disc quota the chances are you will loose many "Tell Me More" prospects, this is because some ISP's Mail Server's will not deliver your message to the recipient if your return/From Address: E-mal address is not valid or bouncing E-mails. You should also log into the "Tell Me More" E-mail account you are using before each bulk E-mail session to make sure this account has not been terminated due a Spam Complaint. If either account has been deleted simply create another and another, this is why I recommend you create at least 5 to save you time. You must keep all your "Tell Me
More" prospects contact details, i.e. E-mail address and Name so you can add them to an Auto Responder if they don't first sign-up after receiving your first follow-up letter. I will teach you how to setup an auto responder later on. Setup Window 3 - Importing your test bulk E-mail list & sending out a test ad: The next window that opens is where you import your bulk E-mail list. Earlier on I said what I would do first is ask you to test the program by sending your ad to yourself and to me to make sure the program is setup correctly and that your ad is actually being delivered. To do this first create a text file called testemaillist.txt on your computers Desktop, within this file enter your 5 E-mail addresses, any other E-mail addresses you have making sure you list 1 E-mail address per line. To import your list click the Import List button on the menu bar, in the dialog box that opens use the Look in: option to search your computer for your test E-mail list text file
testemaillist.txt, if you have followed my instructions it should be on your Desktop. When located highlight the file by clicking it once with your left mouse button and then click the Open button to import your test E-mail list into the program. When your test E-mail list has been imported click the Finish button and a small window will open titled Confirm, click the No button. The program will start to send your ad to your imported test E-mail list. When your ad has been sent, after a few minutes check all your E-mail accounts to see if it has been delivered. If I receive your ad I will reply with
"Tell Me More" written in the Subject Line. When you receive my "Tell Me More" request just send me your 1st follow-up letter so I can confirm you received my "Tell Me More" request. If your ad hasn't been delivered follow the instructions in the section
below.
What do I do if my test E-mail was not delivered ? The most likely reason for this is that when you run the program it did not automatically detect your ISP's DNS server IP address. When this IP address is automatically detected the program will automatically enter it into the DNS: empty box. If after running the program a small window opens telling you that Desktop Server was unable to locate your DNS numbers you
will need to manually enter your ISP's DNS server IP address in the DNS: empty box. To find out what your ISP's DNS server IP address is what you need to do is first make sure you are connected to the Internet then open a Command Prompt. Depending on what operating system you are using the procedure for opening a Command Prompt may be different. Essentially it will be the same except some of the options might be named differently, just use the nearest alternative. To open a Command Prompt click the Start button located at the bottom left had corner of your Desktop, click Programs, click Accessories and select the option Command Prompt. Another way to open a Command Prompt is to click the Start button, select the Runoption, type cmd in the empty box and then click Enter/Return on your keyboard. In the window that opens type
ipconfig /all, press Enter/Return on your keyboard and a lot of text will appear on your screen. Now look for the section that says DNS Servers where you should see 2 sets of numbers separated by full stops/periods, these are your ISP's DNS server IP addresses. What you need to do is right these down somewhere, type the
first set of numbers (including full stops/periods) into the DNS: empty box then try sending out your test ad again. If after a few minutes it still has not been delivered try the second set of numbers. If after following these instructions your test ad is still not delivered you will need to contact your ISP to find out what your DNS Server IP address is.
HOME / SUPPORT |